Residential Grading (GRAD)
Permits for Residential Grading, will require the following naming conventions.
Plans
- This file should be named as follows:
- Plans-GRAD2023-000xx.pdf
- This file to inlcude, but is not limited to:
- Grading
- Drainage
- Stormwater
Supporting Documentation
Supporting Documentation
- These files should be names as follows:
- Not limited to:
- Soils Investigation and/or Geotechnical Engineering Report
- Soils Report-GRAD2023-000xx.pdf
- Structural retaining wall calculations. (if applicable)
- Structural Calcs-GRAD2023-000xx.pdf
- Storm Water Pollution Prevention Plan (SWPP)
- SWPP-GRAD2023-000xx.pdf
- Hydrology Report
- Hydrology Report-GRAD2023-000xx.pdf
- Any or all applicable supporting documentation associated with the applied permit
- Soils Investigation and/or Geotechnical Engineering Report
Note: Minor Grading plans can be included in the commercial building plans.
See Attaching Documents to a Permit on how to attach the plans via PermitSLO. Email County Staff contact when you have uploaded the plans.
The plans and supporting documentation must be labeled and packaged before uploading them for initial plan review. Submit a complete initial package only ONCE. Please verify that plans are sized for printing 24” x 36” sheets. Please verify that supporting documentation is sized for printing 8.5”x11” sheets. Staff will reject plans and supporting documentation if not submitted using the naming conventions above.
PLANS MUST HAVE A BLANK 2”H X 3”W RECTANGLE ON THE LOWER RIGHT CORNER OF EVERY PAGE (IN THE SAME LOCATION) FOR COUNTY STAMP OF APPROVAL. IT IS THE RESPONSIBILITY OF THE PROFESSIONAL IN CHARGE, CONTRACTOR, AGENT, OWNER TO VERIFY COMPLIANCE WITH THIS REQUIREMENT.