Residential Foundation Only (FNDN)

Plans

  • This file should be named as follows:
    • Plans-FNDN2023-000xx.pdf
  • This file to include, but is not limited to:
    • Site Plan
    • Floor Plan
      • The area to be worked on for either mechanical, electrical, plumbing or foundation work. 

Structural Calculations

  • If applicable.
  • This file should be named as follows:
    • Structural Calcs-FNDN2023-000xx.pdf‚Äč

Supporting Documentation

  • These files should be named as follows:
  • Not limited to:
    • California Energy Commission Forms (if applicable)
      • California Energy Commission Forms-FNDN2023-000xx.pdf
    • UL Listing of Equipment (if applicable)
      • UL Listing of Equipment-FNDN2023-000xx.pdf
    • Soils Investigation and/or Geotechnical Engineering Report
      • Soils Report-FNDN2023-000xx.pdf
    • Any or all applicable supporting documentation associated with the applied permit.

 

See Attaching Documents to a Permit on how to attach the plans via PermitSLO. Email County Staff contact when you have uploaded the plans.

The plans and supporting documentation must be labeled and packaged before uploading them for initial plan review. Submit a complete initial package only ONCE. Please verify that plans are sized for printing 24” x 36” sheets. Please verify that supporting documentation is sized for printing 8.5”x11” sheets. Staff will reject plans and supporting documentation if not submitted using the naming conventions above.

PLANS MUST HAVE A BLANK  2”H X 3”W  RECTANGLE ON THE LOWER RIGHT CORNER OF EVERY PAGE (IN THE SAME LOCATION) FOR COUNTY STAMP OF APPROVAL. IT IS THE RESPONSIBILITY OF THE PROFESSIONAL IN CHARGE, CONTRACTOR, AGENT, OWNER TO VERIFY COMPLIANCE WITH THIS REQUIREMENT.

After Inssuance Permit Submittal Procedure